Sensors

Flow management, pressure control, leak detection, safety and alarm systems, among others, for fuel cells and hydrogen (or other fuel) production, storage, distribution and fueling stations.

Sustainable Innovations

111 Roberts Street, East Hartford, CT, United States

Visit page

NTM Sensors

404 Enterprise Drive, Lewis Center, OH, United States

Visit page

Figaro USA Inc.

121 S Wilke Rd, Arlington Heights, IL 60005

Visit page

Unison Industries, LLC

2445 Dayton Xenia Rd, Dayton, OH, United States

Visit page

Watlow Manufacturing Company

5740 Gateway Blvd, Mason, OH, United States

Visit page

Hughes Peters

8000 Technology Boulevard, Huber Heights, OH, United States

Visit page

Azbil North America, Inc.

9033 N 24th Ave, Phoenix, AZ, United States

Visit page

Makel Engineering, Inc.

1585 Marauder St, Chico, CA, 95973

Visit page

MSA / General Monitors

26776 Simpatica Circle, Lake Forest, CA, United States

Visit page

Sensor Electronics Corporation

12730 Creek View Avenue, Savage, MN, United States

Visit page

ZTEK Corporation

300 West Cummings Park, Woburn, MA, United States

Visit page

Teledyne Hastings Instruments

804 Newcombe Avenue, Hampton, VA, United States

Visit page

Setaram, Inc.

Hillsborough Township, NJ, United States

Visit page

Power+Energy, Inc.

106 Railroad Drive, Ivyland, PA, United States

Visit page

Pfeiffer Vacuum

24 Trafalagar Square, Nashua, NH, United States

Visit page

MidSun Specialty Products

378 4 Rod Road, Berlin, CT, United States

Visit page

H2scan Corporation

27215 Turnberry Lane, Valencia, CA, United States

Visit page

Burkert Fluid Control Systems

11425 Mt Holly-Huntersville Rd, Huntersville, NC, United States

Visit page

Alicat Scientific, Inc.

7641 North Business Park Drive, Tucson, AZ, United States

Visit page
Agilent Technologies Santa Clara, CA
Agilent 3000 Micro GC provides accurate and near real-time gas composition analysis to assist fuel cell development worldwide.
ALSO LISTED IN: Sensors, Supplier, Testing     
UPDATED: January 26, 2017

Alicat Scientific manufactures Mass Flow meters and controllers (MFC) along with pressure control and measurement instrumentation. Our mass flow instruments use a unique laminar flow differential pressure technology.
ALSO LISTED IN: Sensors, Supplier, Testing     
UPDATED: October 12, 2016

Azbil North America, Inc. is an overseas affiliate in North America of azbil Corporation and has been serving a wide range of industries in North America with industrial automation and control products since 1996. Products in the Industrial Automation category include pressure transmitters, electromagnetic flow meters and temperature transmitters. Click the link above to view our line of process instruments including the venerable MagneW electromagnetic flow meters and the cutting edge AT9000 series advanced transmitter. Our control products include photoelectric, proximity, and fiber optic sensors along with limit, basic, miniature and safety switches. Also included in this category are liquid leak and level sensors, gas flow meter and control devices, single loop controllers, heat treating and combustion products.
ALSO LISTED IN: Sensors, Supplier     
UPDATED: May 22, 2017

Burkert Fluid Control Systems Huntersville, NC
Burkert Fluid Control Systems is a global system solution provider of the most reliable and innovative microfluidic valves, sensors, process valves, pneumatic actuation, controllers and solenoid valves. Burkert Fluid Control Systems provides the following markets custom fluid control systems: medical equipment, biotech, pharmaceutical, food & beverage, water treatment, semiconductor and general industrial processing.
UPDATED: May 17, 2017

Element One, Inc. Boulder, CO
Element One is developing a simple hydrogen gas indicator system that quickly changes color at concentrations as low as 0.04%─one-hundredth of the lower flammability limit, and reverses when hydrogen is no longer present.
ALSO LISTED IN: Sensors, Supplier     
UPDATED: October 10, 2016

Figaro USA Inc. Arlington Heights, IL
Figaro USA Inc is the authorized distributor in North America for gas sensing products manufactured by parent campany Figaro Engineering Inc. An ISO 9001 compliant company, Figaro Engineering Inc. is the world's leading gas sensor manufacturer. Figaro has over 40 years of experience in producing the most innovative sensors for the worldwide market place. Figaro Gas Sensors are prominently featured in gas detection equipment throughout the world in the fields of safety, health, control systems, and instrumentation.
ALSO LISTED IN: Sensors, Testing     
UPDATED: August 17, 2017

H2scan Corporation Valencia, CA
H2scan is the leading provider of high performance hydrogen-specific sensor systems which provide accurate monitoring and control functions for many applications, including control systems, safety monitoring and alarm systems.
ALSO LISTED IN: Hydrogen Generation/Supply, Sensors     
UPDATED: January 31, 2017

Habco. Inc. Glastonbury, CT
Habco, Inc.designs and builds test stands and tooling for the fuel cell industry. Our newest product, the Model 1094 leakage tester, is an affordable, portable tester that performs leakage testing of fuel cell circuits.
ALSO LISTED IN: Sensors, Supplier, Testing     
UPDATED: August 16, 2017

Hughes Peters Huber Heights, OH
Hughes Peters, Inc. is a regional electronic component distributor headquartered in Huber Heights, Ohio, just outside of Dayton. Our broad line product offering includes fans, connectors, sensors, switches, circuit breakers, cable harnesses, and many other products. Our Value Added Department is ISO and UL certified, and we can support your custom cable harness requirements, whether your volume is small or large. Hughes Peters currently supports some of the fuel cell industry, and we would welcome the opportunity to be of service to your company and your fuel cell requirements.
ALSO LISTED IN: Power Electronics, Sensors, Supplier     
UPDATED: May 8, 2017

Makel Engineering, Incorporated (MEI) was established in 1995 with the primary objective of providing innovative cutting-edge products and services for aviation, space, military and commercial applications. In 1997, the company was relocated from Sacramento to Chico, CA. In 2003 MEI inaugurated its current state-of-the-art facilities, where the company headquarters is located.

Over the years, Makel Engineering has established its name in the MEMS (Micro-Electro-Mechanical-Systems) chemical sensing arena. MEI strives to continuously transform technologies developed jointly with its partners into viable products.

Makel Engineering%u2019s vision is to encourage the use of innovative ideas, and continuously expand its areas of expertise. The company currently has research and development efforts in areas including:

- Microchannel reactor technology
- Space In-situ resources utilization (ISRU)
- Advanced chemical sensors
- Smart fire detection system
- Exhaust monitoring systems
- Clean power generation
ALSO LISTED IN: Sensors, Supplier     
UPDATED: May 16, 2017

NTM Sensors Lewis Center, Ohio
NTM Sensors combines materials science expertise with advanced electrochemistry to create specialty sensor products for superior monitoring and detection of hazardous gases in complex environments. NTM Sensors specializes in providing hydrogen sensors and systems to fuel cell developers and fuel cell powered vehicle manufacturers.
ALSO LISTED IN: Manufacturer, Safety, Sensors, Supplier     
UPDATED: May 2, 2017

Pfeiffer Vacuum Nashua, CT
The fully automatic Pfeiffer Vacuum OmniStar™ gas analysis system has significant advantages over traditional gas-specific sensors in fuel cell research. The compact OmniStar™ benchtop mass spectrometer has the ability to measure all gases simultaneously
ALSO LISTED IN: Sensors, Supplier     
UPDATED: May 22, 2017

Power+Energy, Inc. Ivyland, PA
Power+Energy supplies Hydrogen Separators and Hydrogen Purity Analyzers and is developing high-efficiency, low cost Hydrogen Generators for fuel cell applications. P+E Hydrogen Separators separate pure hydrogen gas from reformate, syn-gas or other mixed gas streams, producing nine 9’s H2 with all impurities reduced to < 1 part-per-billion (ppb). Our Hydrogen Separators are used in Auxiliary Power Units and by the manufacturers of advanced and renewable fuels.
UPDATED: October 12, 2016

Setaram, Inc. Hillsborough, NJ
SETARAM Inc. the leading manufacturer and supplier of high performance thermal analyzers, calorimeters, gas sorption and high pressure mass spectroscopy instruments. We are recognized worldwide for our Calvet 3D Sensor.
ALSO LISTED IN: Sensors, Thermal Management     
UPDATED: May 22, 2017

Sustainable Innovations East Hartford, CT
Sustainable Innovations’ multi-channel hydrogen fuel quality monitor design can detect multiple impurities at low levels in hydrogen. The proposed design consists of an array of electrochemical sensors tuned to respond to critical concentrations of contaminants as defined in the Society of Automotive Engineers’ standards for hydrogen fuel.
ALSO LISTED IN: Developer, Gauges, Safety, Sensors, Testing     
UPDATED: August 16, 2017

Teledyne Hastings Instruments is a trusted manufacturer of a wide range of quality Vacuum Instruments and Gas Mass Flow Instruments . Our vacuum product line includes the original DV-4 and DV-6 thermocouple gauge tubes, along with other vacuum sensors used in combination with meters and controllers that cover a wide range of vacuum pressure from atmosphere to ultra high vacuum.
ALSO LISTED IN: Gauges, High Pressure Plumbing, Sensors, Supplier, Testing     
UPDATED: May 22, 2017

Unison Industries is a world leader in the design and manufacture of electrical and mechanical components, sensors, and systems for aircraft, industrial, marine, military, and space uses. Major product lines include turbine and piston engine ignition systems, electrical power generation and control systems, electrical wiring harnesses and panel assemblies, sensors, switches, and bellows assemblies, tubing, ducting, brackets, flex joints and air valves. Unison's world headquarters, also its largest manufacturing facility, is located in Jacksonville, Florida. Other manufacturing operations are located in Norwich, New York; Rockford, Illinois; Saltillo, Mexico; Dayton, Ohio; Quebec, Canada; and Rayong, Thailand. Currently 1,700 people strong, Unison is a major high-tech employer in the Jacksonville area and all the communities in which it operates.
ALSO LISTED IN: Manufacturer, Sensors, Supplier     
UPDATED: May 2, 2017

Vaisala Inc. Woburn, MA
The Vaisala HUMICAP® Humidity and Temperature Transmitter HMT337 is designed to measure relative humidity in fuel cells. It features a patented, warmed-sensor technology that solves the problem of condensing conditions and improves response speed.
ALSO LISTED IN: Sensors, Supplier, Thermal Management     
UPDATED: October 10, 2016

Watlow Mason, OH
Watlow Manufacturing Co. In business since 1922, providing complete thermal loop solutions, temperature sensors, PID temperature controls, SCR and SSR power switching, electric heaters, with offices and manufacturing facilities around the word. Watlow brings its thermal expertise to numerous applications including, Fuel Cell, Energy Process, Diesel, Foodservice equipment and Life Sciences. Cast Aluminum Solutions. Provider of cast aluminum and cast bronze electric heat exchangers and related heated parts, offers engineering expertise creating products matching thermal and technical requirements with a state of the art manufacturing facility embracing lean principles.
ALSO LISTED IN: Manufacturer, Sensors, Supplier     
UPDATED: May 22, 2017

ZTEK Corporation Woburn, MA
ZTEK is known for its pioneering activities in the field of Solid Oxide Fuel Cell (SOFC) system development. Since 1994, ZTEK has successfully demonstrated a 1kW fuel cell stack, logging 16,000 hours of operation while meeting (and exceeding) its initial performance expectations. A 25kW system with multiple fuel cell stacks and natural gas internal reforming has been developed and is currently in operation, demonstrating reliability of balance-of-plant reforming components. This 25kW system provides the technology basis for ZTEK's commercial-sized systems. A 200kW SOFC/Gas Turbine system is currently under construction.
UPDATED: May 16, 2017